The PARIS Forums: PARIS: Main » syncing Paris as Slave

Home » The PARIS Forums » PARIS: Main » syncing Paris as Slave

Show: Today's Messages :: Polls :: Message Navigator

syncing Paris as Slave [message #70559]

Wed, 26 July 2006 12:19

Don Nafe

Messages: 1206
Registered: July 2005

Senior Member

have
>1600 x 1200. All I can find is 20" on EBay right now. The Dell

Report message to a moderator

Re: syncing Paris as Slave [message #70560 is a reply to message #70559]

Wed, 26 July 2006 12:25

Carl Amburn

Messages: 214
Registered: July 2005

Senior Member

UltraSharp
>2005FPW 20.1" widescreen LCD looks like a pretty nice unit and these can
be
>had used for around $300.00 on EBay these days. That's *do'able* budget
>wise, but "used is used" and I've had some less than stellar experiences
>with refurbed LCD's so I'm a bit wary.
>
>Anyone have any suggestions on a good LCD (1600 x 1200 is a must)
>
>Thanks,
>
>Deej
>
>HI,
1 or 2 or these mounted on your PCI slots will do a good job of keeping
he EDS cards cool and they are quiet.

Report message to a moderator

Re: syncing Paris as Slave [message #70561 is a reply to message #70559]

Wed, 26 July 2006 12:22

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

target="_blank"> http://www.zalman.co.kr/eng/product/view.asp?idx=15&code =016

Chris

Damien Gel�e wrote:
> Hi,
>
> Did someone ever blown an EDS with heat inside the computer ?
> Box are getting hotter than when EDS have been made, i wonder if it can
> work nevertheless.
>
> thanks,
>
> Damien
>
>

--
Chris Ludwig

ADK Pro Audio
(859) 635-5762
www.adkproaudio.com
chrisl@adkproaudio.comOne

Report message to a moderator

Re: syncing Paris as Slave [message #70562 is a reply to message #70559]

Wed, 26 July 2006 13:42

Rod Lincoln
Messages: 883
Registered: September 2005

Senior Member

time I (a loooong time ago)....... thought I'd see how long of an EDS
reverb time I could set on an aux - I pretty sure I maxed out the setting
and then tried to play it back (I was going for this "fade into reverb
mix-outro-thing"). I completely fried an EDS card from doing that. I think
the effects chip overheated. Other t

Report message to a moderator

Re: syncing Paris as Slave [message #70563 is a reply to message #70559]

Wed, 26 July 2006 14:45

Don Nafe

Messages: 1206
Registered: July 2005

Senior Member

han that, I have ran 4 EDS cards in a
regular case for quite a while with no problems (maybe had 3 fans in it?).
Now I have a very roomy rackmount case with a super fan (7") on the front
and three more inside.

-Carl
p.s. I've switched to rendering my crazy reverb effects since then. :)

"Damien Gel�e" <damien.

Report message to a moderator

Re: syncing Paris as Slave [message #70565 is a reply to message #70563]

Wed, 26 July 2006 15:07

Carl Amburn

Messages: 214
Registered: July 2005

Senior Member

rget="_blank">44fdabc7@linux...
>
> Hi,
>
> Did someone ever blown an EDS with heat inside the computer ?
> Box are getting hotter than when EDS have been made, i wonder if it can
> work nevertheless.
>
> thanks,
>
> Damien
>
>Hi,
It's been awhile I know but I am still hanging tough
with Paris even though our studio has a dmx-100
and pro tools TDM running. I've had luck syncing Paris
to the DMX-100 via MTC but no love with MMC (Midi machine control).
My paris midi devices only show an output port to my usb
midi interface but I need an input port to receive midi from the DMX-100.
Could my configuration have a problem?
Any ideas? Anyone have success with MMC and Paris?
Thanks a bunch!
ChrisHello again. I t

Report message to a moderator

Re: syncing Paris as Slave [message #70567 is a reply to message #70563]

Wed, 26 July 2006 15:08

EK Sound

Messages: 939
Registered: June 2005

Senior Member

e
with some files I wouldn't mind recovering. Nothing too critical, but I'd
like to retrieve them before attempting to repair that XP installation.
However, it seems that the XP code still has administrative control over
those files. How can I get past this hurdle?

Hope everyone has been well.
JimmyHey Deej,
I just picked up a Dell 2007FPW on Craigslist for $300
and the screen is plenty wide for a full submix running
at it's native resolution. Apparently, the Dell Ultrasharp
series are the same LG LCD screens used in the Apple Cinema
Displays. I must say that this thing is brighter and sharper
than anything I've had in terms of LCD's and they are pretty
affordable with a wide screen ratio. Good lu

Report message to a moderator

Re: syncing Paris as Slave [message #70574 is a reply to message #70563]

Wed, 26 July 2006 16:24

Rod Lincoln
Messages: 883
Registered: September 2005

Senior Member

to reverb
> mix-outro-thing"). I completely fried an EDS card from doing that. I think
> the effects chip overheated. Other than that, I have ran 4 EDS cards in a
> regular case for quite a while with no problems (maybe had 3 fans in it?).
> Now I have a very roomy rackmount case with a super fan (7") on the front
> and three more inside.
>
> -Carl
> p.s. I've switched to rendering my crazy reverb effects since then. :)
>
> "Damien Gel�e" <damien.gelee@club-internet.fr> wrote in message
> news:44fdabc7@linux...
> >
> > Hi,
> >
> > Did

Report message to a moderator

Re: syncing Paris as Slave [message #70575 is a reply to message #70567]

Wed, 26 July 2006 16:38

Don Nafe

Messages: 1206
Registered: July 2005

Senior Member

someone ever blown an EDS with heat inside the computer ?
> > Box are getting hotter than when EDS have been made, i wonder if it can
> > work nevertheless.
> >
> > thanks,
> >
> > Damien
> >
> >
>
>Not neccesarily so if you set the permissions as such manually. Buy a USB
removable drive case as Ed says, load it with the damaged drive, plug in the
usb cable, and then...What you will have to do is take ownership, you can
hit the KB (knowledge base) at support.microsoft.com for further details on
that.

AA

"Ed" <askme@email.com> wrote in message news:44fdebc8@linux...
> Easiest way I can think of is to purchase a USB hard drive enclosure for
> it... pop it in a USB slot and presto!
> I think that is what you meant? When you say XP holds control over those
> files... I assume that is only when the XP is running. Kinda impossible
> to hold control over the files if it isn't running...
>

Report message to a moderator

Re: syncing Paris as Slave [message #70578 is a reply to message #70575]

Wed, 26 July 2006 17:16

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

that the XP code still has administrative control
over
> >> those files. How can I get past this hurdle?
> >>
> >> Hope everyone has been well.
> >> Jimmy
> >>
> >>
> >
> >
>
>I had already tried it via the slave slot on the (removable) primary IDE
bus.

Jimmy

"Ed" <askme@email.com> wrote in message news:44fdebc8@linux...
> Easiest way I can think of is to purchase a USB hard drive enclosure for
> it... pop it in a USB slot and presto!
> I think that is what you meant? When you say XP holds control over those
> files... I assume that is only when the XP is running. Kinda impossible
to
> hold control over the files if it isn't running...
>A lot of online videos have been created with QT7 using H.264 codec, which
wasn't in v6. Could be your IE Quicktime plugin just wasn't the latest; or
your browser just wasn't set to use the latest version. Updating from
within one browser doesn't necessarily update the plugin for other browsers.

Dedric

On 9/5/06 7:46 AM, in article 44fd7e17$1@linux, "Don Nafe" <dnafe@magma.ca>
wrote:

> Yep...using IE...funny I had this trouble with another site
> www.drummerworld.com but soon a

Report message to a moderator

Re: syncing Paris as Slave [message #70579 is a reply to message #70574]

Wed, 26 July 2006 17:18

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

s I updated my quicktime this problem
> disappeared.
>
> Weird
>
> Don
>
>
> "Ed" <askme@email.com> wrote in message news:44fd589f$1@linux...
>> Don... are you using firefox? I'll betcha you wouldn't get that message
>> with IE. I have used firefox for quite a few years dealing with issues as
>> you stated... and I finally quite using it. There are others that claim
>> it is the best thing since peanut butter, but I refuse to accept that. It
>> has more bugs than a Louisiana summer night... as far as I am concerned...
>> Just my opinion. Anyway, I did finally get quicktime to work in firefox,
>> but I honestly don't remember what I changed in the settings... Sorry I
>> can't be more help.. perhaps someone else knows what to change....
>>
>>
>> "Don Nafe" <dnafe@magma.ca> wrote in message news:44fd4bc6$1@linux...
>>> Hi all
>>>
>>> whenever I do to one the yahoo.video or go

Report message to a moderator

Re: syncing Paris as Slave [message #70584 is a reply to message #70575]

Wed, 26 July 2006 19:57

Martin Harrington

Messages: 560
Registered: September 2005

Senior Member

ank">chris_cortez@kcsm.net> wrote in message news:44fdd193$1@linux...
>
> Hi,
> It's been awhile I know but I am still hanging tough
> with Paris even though our studio has a dmx-100
> and pro tools TDM running. I've had luck syncing Paris
> to the DMX-100 via MTC but no love with MMC (Midi machine control).
> My paris midi devices only show an output port to my usb
> midi interface but I need an input port to receive midi from the DMX-100.
> Could my configuration have a problem?
> Any ideas? Anyone have success with MMC and Paris?
> Thanks a bunch!
> ChrisHave you tested the disk to see there isn't any problems with crossed linked
files etc., before ghosting? Ghost don't like these kind of things at all
and will show up with error messages. It's always a good idea to use Norton
Utilities, Scandisk or something similar program, to check and repair the
disk before ghosting.

Erling

"Cujo" <chris@nospamapplemanstudio.com> skrev i melding
news:44fd9c7c$1@linux...
>
>
> Hey y'all,
>
> I just intstalled Norton Ghost 10.0 and when I trie to make a back up to
> my external drive I get 3 error messages, I can't find anything out on
> their
> site.
> I get EC8f1787
> E780001
> EBAB03F1
> ANyone know what these are?
>
>

Report message to a moderator

Re: syncing Paris as Slave [message #70587 is a reply to message #70579]

Wed, 26 July 2006 20:43

Aaron Allen

Messages: 1988
Registered: May 2008

Senior Member

ailto:carlamburn@hotNOSPAMmail.com" target="_blank">carlamburn@hotNOSPAMmail.com> wrote in message
>news:44fdcf7a@linux...
>> One time I (a loooong time ago)....... thought I'd see how long of an EDS
>> reverb time I could set on an aux - I pretty sure I maxed out the setting
>> and then tried to play it back (I was going for this "fade into reverb
>> mix-outro-thing"). I completely fried an EDS card from doing that. I think
>> the effects chip overheated. Other than that, I have ran 4 EDS cards in a
>> regular case for quite a while with no problems (maybe had 3 fans in it?).
>> Now I have a very roomy rackmount case with a super fan (7") on the front
>> and three more inside.
>>
>> -Carl
>> p.s. I've switched to rendering my crazy reverb effects since then. :)
>>
>> "Damien Gel�e" <damien.gelee@club-internet.fr> wrote in message
>> news:44fdabc7@linux...
>> >
>> > Hi,
>> >
>> > Did someone ever blown an EDS with heat inside the computer ?
>> > Box are getting hotter than when EDS have been made, i wonder if it can
>> > work nevertheless.
>> >
>> > thanks,
>> >
>> > Damien
>> >
>> >
>>
>>
>"What you will have to do is take ownership," that is just so dr.
phil...eww...

On Tue, 5 Sep 2006 19:14:55 -0500, "Aaron Allen"
<know-spam@not_here.dude> wrote:

>Not

Report message to a moderator

Re: syncing Paris as Slave [message #70596 is a reply to message #70584]

Thu, 27 July 2006 07:31

Don Nafe

Messages: 1206
Registered: July 2005

Senior Member

ith heat inside the computer ?
> >> > Box are getting hotter than when EDS have been made, i wonder if it
can
> >> > work nevertheless.
> >> >
> >> > thanks,
> >> >
> >> > Damien
> >> >
> >> >
> >>
> >>
> >
>It's not the Paris D/A's that are making the difference I can assure you.
It's the Paris summing architecture. Even with two tracks it makes a
difference. You can improve the sound of Paris further by using a standalone
D/A converter like the Benchmark DAC-1 or even by using an external word
clock.

"CJG" <cj@grimmark.com> wrote in message news:44fe9546$1@linux...
>
> Hello everyone.
> Time for a slightly "amateuristic" question again:)
>
> I have some Waves 5.0 Mastering plugins and my plan
> was to use them in Pro Tools LE/Mbox.
> When I started working on a stereofile a thought "what's wrong with my
mix?"
> Obviously everything sounds like S**T through M-box compared to the Paris
> outs.
>
> Would it be wise to send a signal out through the Mbox SPDIF and into the
> Paris SPDIF to take full advantage of the Paris DA's while monitoring the
> mastering session?
>
> Or - does the SPDIF have some limititations that I'm not aware of?
> Thanks!!
> CJG"(fuckin' ingrate)"

DAMN RIGHT PORKCHOP

On Wed, 6 Sep 2006 08:14:49 -0600, "DJ"
<animix_spam-this-ahole_@animas.net> wrote:

>
>"rick" <parnell68@hotmail.com> wrote in message
>news:es2

Report message to a moderator

Re: syncing Paris as Slave [message #70597 is a reply to message #70596]

Thu, 27 July 2006 07:33

Deej [1]

Messages: 2149
Registered: January 2006

Senior Member

tf212rqsvo379et8ato6vq82qaotqkn@4ax.com...
>> one would have thought you to be the first in this case and not some
>> loser wannabe...santa, the bunny and now...you. sorry for the harsh
>> loser thing but when an icon falls...they fall hard...
>
>Hey!!!........I was the fist person on earth to plug a bidirectional CAT5
>cable between a MEC and an EDS card.
>(fuckin' ingrate)
>
>>
>>
>>
>> On Tue, 5 Sep 2006 17:44:01 -0600, "DJ"
>> <animix_spam-this-ahole_@animas.net> wrote:
>>
>> >)....... thought I'd see how long of an EDS
>> >> reverb time I could set on an aux - I pretty sure I maxed out the
>setting
>> >> and then tried to play it back (I was going for this "fade into reverb
>> >> mix-outro-thing"). I completely fried an EDS card from doing that.
>> >
>> >Now THAT'S COOL!!!!.......errr....well that's hot, but COOL!! Sounds like
>> >something I need to try.
>> >
>> >;o)
>> >
>> >"Carl Amburn" <carlamburn@hotNOSPAMmail.com> wrote in message
>> >news:44fdcf7a@linux...
>> >> One time I (a loooong time ago)....... thought I'd see how long of an
>EDS
>> >> reverb time I could set on an aux - I pretty sure I maxed out the
>setting
>> >> and then tried to play it back (I was going for this "fade into reverb
>> >> mix-outro-thing"). I completely fried an EDS card from doing that. I
>think
>> >> the effects chip overheated. Other than that, I have ran 4 EDS cards in
>a
>> >> regular case for quite a while with no problems (maybe had 3 fans in
>it?).
>> >> Now I have a very roomy rackmount case with a super fan (7") on the
>front
>> >> and three more inside.
>> >>
>> >> -Carl
>> >> p.s. I've switched to rendering my crazy reverb effects since then. :)
>> >>
>> >> "Damien Gel�e" <damien.gelee@club-internet.fr> wrote in message
>> >> news:44fdabc7@linux...
>> >> >
>> >> > Hi,
>> >> >
>> >> > Did someone ever blown an EDS with heat inside the computer ?
>> >> > Box are getting hotter than when EDS have been made, i wonder if it
>can

Report message to a moderator

Re: syncing Paris as Slave [message #70599 is a reply to message #70597]

Thu, 27 July 2006 09:34

Don Nafe

Messages: 1206
Registered: July 2005

Senior Member

. Then I'm gonna start jacking with the deck until I can get
some really good flutter going and I'm gonna mix a project this way, summing
the outputs of all of the audio devices with Hosa "Y" cables to a Mackie
1202 and I'm gonna send it to you to master...........

(fuckin ingrate)

;o)
>
>
>
> On Wed, 6 Sep 2006 08:14:49 -0600, "DJ"
> <animix_spam-this-ahole_@animas.net> wrote:
>
> >
> >"rick" <parnell68@hotmail.com> wrote in message
> >news:es2tf212rqsvo379et8ato6vq82qaotqkn@4ax.com...
> >> one would have thought you to be the first in this case and not some
> >> loser wannabe...santa, the bunny and now...you. sorry for the harsh
> >> loser thing but when an icon falls...they fall hard...
> >
> >Hey!!!........I was the fist person on earth to plug a bidirectional CAT5
> >cable between a MEC and an EDS card.
> >(fuckin' ingrate)
> >
> >>
> >>
> >>
> >> On Tue, 5 Sep 2006 17:44:01 -0600, "DJ"
> >> <animix_spam-this-ahole_@animas.net> wrote:
> >>
> >> >)....... thought I'd see how long of an EDS
> >> >> reverb time I could set on an aux - I pretty sure I maxed out the
> >setting
> >> >> and then tried to play it back (I was going for this "fade into
reverb
> >> >> mix-outro-thing"). I completely fried an EDS card from doing that.
> >> >
> >> >Now THAT'S COOL!!!!.......errr....well that's hot, but COOL!! Sounds
like
> >> >something I need to try.
> >> >
> >> >;o)
> >> >
> >> >"Carl Amburn" <carlamburn@hotNOSPAMmail.com> wrote in message
> >> >news:44fdcf7a@linux...
> >> >> One time I (a loooong time ago)....... thought I'd see how long of
an
> >EDS
> >> >> reverb time I could set on an aux - I pretty sure I maxed out the
> >setting
> >> >> and then tried to play it back (I was going for this "fade into
reverb
> >> >> mix-outro-thing"). I completely fried an EDS card from doing that. I
> >think
> >> >> the effects chip overheated. Other than that, I have ran 4 EDS cards
in
> >a
> >> >> regular case for quite a while with no problems (maybe had 3 fans in
> >it?).
> >> >> Now I have a very roomy rackmount case with a super fan (7") on the
> >front
> >> >> and three more inside.
> >> >>
> >> >> -Carl
> >> >> p.s. I've switched to rendering my crazy reverb effects since then.
:)
> >> >>
> >> >> "Damien Gel�e" <

Report message to a moderator

Re: syncing Paris as Slave [message #70603 is a reply to message #70597]

Thu, 27 July 2006 15:51

Martin Harrington

Messages: 560
Registered: September 2005

Senior Member

an icon falls...they fall hard...
>
>Hey!!!........I was the fist person on earth to plug a bidirectional CAT5
>cable between a MEC and an EDS card.
>(fuckin' ingrate)
>
>>
>>
>>
>> On Tue, 5 Sep 2006 17:44:01 -0600, "DJ"
>> <animix_spam-this-ahole_@animas.net> wrote:
>>
>> >)....... thought I'd see how long of an EDS
>> >> reverb time I could set on an aux - I pretty sure I maxed out the
>setting
>> >> and then tried to play it back (I was going for this "fade into reverb
>> >> mix-outro-thing"). I completely fried an EDS card from doing that.
>> >
>> >Now THAT'S COOL!!!!.......errr....well that's hot, but COOL!! Sounds
like
>> >something I need to try.
>> >
>> >;o)
>> >
>> >"Carl Amburn" <carlamburn@hotNOSPAMmail.com> wrote in message
>> >news:44fdcf7a@linux...
>> >> One time I (a loooong time ago)....... thought I'd see how long of
an
>EDS
>> >> reverb time I could set on an aux - I pretty sure I maxed out the
>setting
>> >> and then tried to play it back (I was going for this "fade into reverb
>> >> mix-outro-thing"). I completely fried an EDS card from doing that.
I
>think
>> >> the effects chip overheated. Other than that, I have ran 4 EDS cards
in
>a
>> >> regular case for quite a while with no problems (maybe had 3 fans in
>it?).
>> >> Now I have a very roomy rackmount case with a super fan (7") on the
>front
>> >> and three more inside.
>> >>
>> >> -Carl
>> >> p.s. I've switched to rendering my crazy reverb effects since then.
:)
>> >>
>> >> "Damien Gel�e" <damien.gelee@club-internet.fr> wrote in message
>> >> news:44fdabc7@linux...
>> >> >
>> >> > Hi,
>> >> >
>> >> > Did someone ever blown an EDS with heat inside the computer ?
>> >> > Box are getting hotter than when EDS have been made, i wonder if
it
>can
>> >> > work nevertheless.
>> >> >
>> >> > thanks,
>> >> >
>> >> > Damien
>> >> >
>> >> >
>> >>
>> >>
>> >
>>
>
>"Aaron Allen" <know-spam@not_here.dude> wrote:
> http://www.usatoday.com/tech/news/2006-08-07-text-message-fi red_x.htm
>
> http://www.usatoday.com/tech/news/2006-08-30-radioshack-emai l-layoffs_x.htm
>
>Man, what a sign 'o the times.
>
>AA
>
>

Report message to a moderator

Re: syncing Paris as Slave [message #70616 is a reply to message #70587]

Fri, 28 July 2006 01:12

Martin Harrington

Messages: 560
Registered: September 2005

Senior Member

out every 2 years usually for me at
least, which is about the same for most any computing platform, including my
brain, which is due for an update pretty soon. I need to be able to keep up
with my 5 yr old.

MacPro - isn't that an oxymoron? ...considering that you can make home
movies, and listen to music, and make photo albums....and make home movies,
and listen to music, and, and, ummm...and...umm...so it's a combo vcr/slide
projector/boombox! Yep, you see those in pro studios all the time. ;-)

Okay, sure, Windows machines can run time warping games ("What do you mean
it's Friday?!? I missed a week of work?!?!") and legal viruses, such as
Norton, MacAfee, etc. Everyone needs those. Like a broken leg.

David - best of luck with HD3, and you have our sympathies.

Hey if it gets clients and pays the bills, I say go for it and enjoy it.

Regards,
Dedric

>
> Apple, I dunno. At this point you should be able to get a couple of
> years out of the investment at least. That's a fast enough box out of
> the, uh, box. Just add a couple RAM sticks. It even has a removable HD
> setup from the getgo, so swap out client drives as needed.
>
> Of course there's the OSX update next year (full 64 bit) but at probably
> be half the cost of the upcoming MSWindows update.
>
> Cheers,
> -Jamie
> http://www.JamieKrutz.com
>
>
> DJ wrote:
>> Let's keep a running tally of how much nickel and diming goes on with Digi
>> and Apple. In all seriousness though, I hope this is a cost effective
>> solution to bringing you more clients.
>>
>> Good luck,
>>
>> Deej
>>
>> "EK Sound" <askme@nospam.com> wrote in message news:44ff2c15$1@linux...
>>> After years of turning away work and trying to convince clients that
>>> we can still do great work without certain tools, we have finally caved.
>>>
>>> We just ordered HD3... and a.... (shudder)... MACpro.
>>>
>>> I feel so dirty......
>>>
>>> David.
>>
>>LOL! good post, Dedric.

Neil

Dedric Terry <

Report message to a moderator

Previous Topic:	Gear purchase - Chris Ludwig/ Morgan Petinato
Next Topic:	fried motherboard?!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Aug 05 19:24:49 PDT 2026

Total time taken to generate the page: 0.02598 seconds