Home » The PARIS Forums » PARIS: Main » OT: Question and a possible Idea for some of you
| OT: Question and a possible Idea for some of you [message #56244] |
Tue, 26 July 2005 06:36  |
Neil
Messages: 1645
Registered: April 2006
|
Senior Member |
|
|
u, me and Bill Lorentzen are the only ones here who use
these plugins. I hve the hardware card and the DX plugins. They are indeed
great stuff.
"Dimitrios" <musurgio@otenet.gr> wrote in message news:431c836d@linux...
> What I have found is that dspfx are wonderful plugins and most amazingly
> Studioverb acousticverb, Chorus, autopan, Aural exciter ,Delay have 0
> Latency !!!
> Yes 0
> Optimizer has 33 samples latency
> Flanger has 1024 samples !
> It is amazing that dspfx reverbs are 0 latent....
> Regards,
> Dimitrios
>
>Apology not necessary and you know it. How could I respect you if you
don't pull my card once in a while.
I admit I got a little carried away... what can I say I'm a redhead.
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:431be009$1@linux...
> I'd like to unilaterally apologize to Cron for the tone of my posts. It
> wasn't polite at all. We were both upset and I certainly played a part in
> all of this too.
>
> Sorry.
>
> DJ
>
>
>
> "Kim" <hiddensounds@hotmail.com> wrote in message news:431bdcd2$1@linux...
>>
>>
>> Things are just getting a little too tense around here. I don't want to
> have
>> to be editing posts, deleting threads, banning people or anything like
> that.
>> Things are getting a little too heated and most of the current threads of
>> discussion are currently a long way from anything I'd call "intelligent
> and
>> fruitfull". Not that nothing positive has been said, but generally
>> there's
>> not much understanding happenning.
>>
>> We're all a little tense over this New Orleans thing. Everyone who wants
>> to has made a statement. I'd appreciate if everyone could step back for a
>> moment and reflect upon the needy in all this. We're all keen to find
> someone
>> to blame... someone at fault. We're all frustrated by what's going on.
&g
|
|
|
|
| Re: Question and a possible Idea for some of you [message #56246 is a reply to message #56244] |
Tue, 26 July 2005 06:59  |
Deej [1]
Messages: 2149
Registered: January 2006
|
Senior Member |
|
|
/>
>> At heart everybody is just frustrated by the issues and doesn't want to
> see
>> any more mistakes. Let's reflect upon that.
>>
>> And let's remember that none of us are all right or all wrong.
>>
>> Like I said, I don't want to have to start editing posts and threads.
> Let's
>> chill out a bit.
>>
>> Cheers,
>> Kim.
>
>I'm using them too, but not as much as earlier.
Erling
"DJ" <animix_spam-this-ahole_@animas.net> skrev i en meddelelse
news:431c8ee1$1@linux...
> To my knowledge, you, me and Bill Lorentzen are the only ones here who use
> these plugins. I hve the hardware card and the DX plugins. They are indeed
> great stuff.
>
>
> "Dimitrios" <musurgio@otenet.gr> wrote in message news:431c836d@linux...
>> What I have found is that dspfx are wonderful plugins and most amazingly
>> Studioverb acousticverb, Chorus, autopan, Aural exciter ,Delay have 0
>> Latency !!!
>> Yes 0
>> Optimizer has 33 samples latency
>> Flanger has 1024 samples !
>> It is amazing that dspfx reverbs are 0 latent....
>> Regards,
>> Dimitrios
>>
>>
>
>yha, that was on purpose Einstein.
The point is Cron, insulting and calling a user on
this newsgroup a name is uncalled for. Someone like Doug,
who is very kind and helpful to all of us, doesn't deserve
that. Nobody does.
Right now, it's a little bit bigger then our
political leanings.
Been here since 1998, believe me, if i wanted to get to know
you..... you would know me.
This isn't a conversation, i'm done posting, it's a waste
of time.
For those i offended, i apologize.
michael bliss
"justcron" <justcron@hydrorecords.commune> wrote:
>"michael bliss" <mbliss1@austin.rr.com> wrote in message
>news:431bbe7d$1@linux...
>>
>>>I would appreciate it dude if you could not use profanity to insult NG
>>>participants,
>> yha, and with that being said....Fuck You- Just Cron.
>
>so you're quoting Kim and simultaneously disgregarding his request.
>
>LOL...
>
>you're a clown pal... in fact I seriously have no idea who you are or what
>you do or how long you've been around, so your words carry ZERO weight with
>me.
>
>Yep I* don't doubt you are using these nice plugz ,but what most impressed
me that these although old enouph they share 0 latency on most of them !
That makes them too wonderful working with Paris without needing to
compensate for latencies.
Same goes for Sonalksis plugz too, zero latency also.
Regards,
Dimitrios
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:431c8ee1$1@linux...
> To my knowledge, you, me and Bill Lorentzen are the only ones here who use
> these plugins. I hve the hardware card and the DX plugins. They are indeed
> great stuff.
>
>
> "Dimitrios" <musurgio@otenet.gr> wrote in message news:431c836d@linux...
> > What I have found is that dspfx are wonderful plugins and most amazingly
> > Studioverb acousticverb, Chorus, autopan, Aural exciter ,Delay have 0
> > Latency !!!
> > Yes 0
> > Optimizer has 33 samples latency
|
|
|
|
| Re: Question and a possible Idea for some of you [message #56250 is a reply to message #56246] |
Tue, 26 July 2005 07:06 |
justcron
Messages: 330
Registered: May 2006
|
Senior Member |
|
|
have
> >> to be editing posts, deleting threads, banning people or anything like
> > that.
> >> Things are getting a little too heated and most of the current threads
of
> >> discussion are currently a long way from anything I'd call "intelligent
> > and
> >> fruitfull". Not that nothing positive has been said, but generally
> >> there's
> >> not much understanding happenning.
> >>
> >> We're all a little tense over this New Orleans thing. Everyone who
wants
> >> to has made a statement. I'd appreciate if everyone could step back for
a
> >> moment and reflect upon the needy in all this. We're all keen to find
> > someone
> >> to blame... someone at fault. We're all frustrated by what's going on.
> > Let's
> >> stop attacking each other and think about how we may be able to help.
> >>
> >> At heart everybody is just frustrated by the issues and doesn't want to
> > see
> >> any more mistakes. Let's reflect upon that.
> >>
> >> And let's remember that none of us are all right or all wrong.
> >>
> >> Like I said, I don't want to have to start editing posts and threads.
> > Let's
> >> chill out a bit.
> >>
> >> Cheers,
> >> Kim.
> >
> >
>
>yep i know you, you've been an ass since you joined.
there was those few months where you became quite
tame and tolerable. but alas, another chance for you to
ruffle some feathers and make yourself heard. Congratulations!
Oh, by the way, i'm the guy that you sold an EDS card to a
few months back Einstein.
michael bliss
"justcron" <justcron@hydrorecords.commune> wrote:
>
>"michael bliss" <mbliss1@austin.rr.com> wrote in message
>news:431c9675$1@linux...
>
>> Been here since 1998, believe me, if i wanted to get to know
>> you..... you would know me.
>
>wow, 7 years in the same newsgroup and I still have no idea who you are.
>
>Impressive!
>
>But you know me of course.
>
>"michael bliss" <mbliss1@austin.rr.com> wrote in message
news:431c98ec$1@linux...
>
> yep i know you, you've been an ass since you joined.
> there was those few months where you became quite
> tame and tolerable. but alas, another chance for you to
> ruffle some feathers and make yourself heard. Congratulations!
> Oh, by the way, i'm the guy that you sold an EDS card to a
> few months back Einstein.
I never sold an EDS, you dumb fuck. (sorry Kim)Cron,
I've known Michael for a while. He's a friend and an incredible talent. Same
with Claytor. We go way back. Their support for me has nothing to do with
whether they agree with my political thinking. I know that for sure. I would
defend them, and you too, if something like this started up with someone's
name in a thread.
We've both pissed in the pool and stirred up a mess here. I think this is
more about that in the bigger picture.
You and I have buried the hatchet now. I don't want to see this get started
again or have it get any uglier.
For the sake of this group, let's all call a truce,
.........................please.
Deej
"justcron" <justcron@hydrorecords.commune> wrote in message
news:431c974e@linux...
>
> "michael bliss" <mbliss1@austin.rr.com> wrote in message
> news:431c9675$1@linux...
>
> > Been here since 1998, believe me, if i wanted to get to know
> > you..... you would know me.
>
> wow, 7 years in the same newsgroup and I still have no idea who you are.
>
> Impressive!
>
> But you know me of course.
>
>Believe me your co-sign of them goes a much longer way than theirs of you.
but check your pal Michael Bliss. He just posted saying I sold him an EDS
card a couple months ago. Totally false. If thats bullshit, so is
everything else out of his mouth, and it's my moral responsibility to set
the facts straight.
re: me and you.. the truce is on sir.
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:431c
|
|
|
|
|
|
|
|
| Re: Question and a possible Idea for some of you [message #56259 is a reply to message #56244] |
Tue, 26 July 2005 09:59 |
Tony Benson
Messages: 453
Registered: June 2006
|
Senior Member |
|
|
pples.
When I get back, I will bang on the guitar a while, and hit the heavy=20
bag, maybe work on some lyrics. =20
There's gots to be something better to do with our time.
DC
------=_NextPart_000_0085_01C5B237.BEAFE0F0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1400" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>I'm donating at my wife's work =
'Redcats' because=20
they are</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>doubling the funds. </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Tom</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<BLOCKQUOTE=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV>"DC" <<A =
href=3D"mailto:dc@spamaliberal.org">dc@spamaliberal.org</A>>=20
wrote in message <A=20
=
href=3D"news:431c8d32$1@linux">news:431c8d32$1@linux</A>...</DIV><BR>Has =
any of=20
it accomplished anything?<BR><BR>Any minds changed? And =
new=20
friends made?<BR><BR>Any of the poor victims of Katrina=20
helped?<BR><BR>Nah... <BR><BR>I'm off to go enjoy some =
sun, pick=20
some apples.<BR><BR>When I get back, I will bang on the guitar a =
while, and=20
hit the heavy <BR>bag, maybe work on some lyrics. =
<BR><BR>There's gots=20
to be something better to do with our=20
time.<BR><BR><BR>DC<BR></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_0085_01C5B237.BEAFE0F0--In preperation for a Kidney transplant I had to have a Angiogram and Heart
Catherization. The angiogram revealed two of my arteries were blocked and
they
had to place stents in the blocked arteries. Everything
went well and I'm doing great. Thank God I wasn't in
the path of Katrina.
respect
Nappy"Nappy" <mgrant01@san.rr.com> wrote:
>What the hell does this mean?
It means that identity politics will ruin your life, my life, Jason's life
and our country. It means that none of us are safe from it no
matter our color. The very thing we think will protect us,
membership in an offended and victimized group, will turn on us
like a nasty pt bull at the worst possible moment.
It can happen to you too.
respect,
DC"Tom B
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: Question and a possible Idea for some of you [message #56290 is a reply to message #56276] |
Tue, 26 July 2005 20:40 |
Neil
Messages: 1645
Registered: April 2006
|
Senior Member |
|
|
mps on this project
> and even my tube gear is dead quiet........so I'm almost positive this is
> cumulative dither noise. Fading the tracks takes care of it and the final
> stage of the process is yet another dither.
>
> Rather than thinking it unpleasant, I'm actually liking the sound of this,
> though it certainly isn't digital purity by any stretch.
>
> I ned to paly around with this some more though. This is a small
> project........15 tracks tops. I don't know how this would sound in a
> project with 40 + tracks. Might be a problem.
>
> Hmmmm.......
>
>I have been thinking of a new bumper sticker:
"the French were right"
But, I'll lay off right now
"Martin Harrington" <lendan@bigpond.net.au> wrote:
>What's wrong with FRENCH??
>
>--
>Martin Harrington
>www.lendanear-sound.com
>
>"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>news:Report message to a moderator
|
|
|
|
| Re: OT: Question and a possible Idea for some of you [message #56307 is a reply to message #56244] |
Wed, 27 July 2005 06:27 |
Jef Knight
Messages: 19
Registered: July 2005
|
Junior Member |
|
|
get="_blank">1@linux...
> > To my knowledge, you, me and Bill Lorentzen are the only ones here who
use
> > these plugins. I hve the hardware card and the DX plugins. They are
indeed
> > great stuff.
> >
> >
> > "Dimitrios" <musurgio@otenet.gr> wrote in message news:431c836d@linux...
> > > What I have found is that dspfx are wonderful plugins and most
amazingly
> > > Studioverb acousticverb, Chorus, autopan, Aural exciter ,Delay have 0
> > > Latency !!!
> > > Yes 0
> > > Optimizer has 33 samples latency
> > > Flanger has 1024 samples !
> > > It is amazing that dspfx reverbs are 0 latent....
> > > Regards,
> > > Dimitrios
> > >
> > >
> >
> >
>
>So POST something instead of lurking and then bitching.
John
Deadmeat wrote:
> Well, hello all –
>
> As usual, it’s been a light-year since I last posted. Still recording on
> a huge PARIS system, and still wondering why I’m still doing it. Thought
> I’d check into the board
> to see what’s been going on with the group………….
>
> Well, I don’t see much PARIS discussion going on – a lot of bashing, trashing,
> and shit-tons of OT, but not much PARIS. For someone like me who likes to
> pop in occasionally and see what the group is up to (and make sure people
> are still alive and using this product), it’s a little disheartening.
>
> This board is really the only place that I can go to make sure that this
> product is still in use, and still loved by at least a small community. It’s
> also the only form of “technical support” left on the planet. It’s especially
> sad when you realize that the top brains on this forum could EASILY form
> their own company doing something like PARIS, and would have an immediate
> client-base at hand.
>
> There’s an idea – instead of bashing the crap out of each other, why don’t
> you all pull your resources and start a DAW company – I know everyone on
> this forum would be behind that.
>All the best here to you my friend !
rick wrote:
> hang in there nappman. the thoughts and prayers are still happening.
>
> On 6 Sep 2005 06:39:02 +1000, "Nappy" <mgrant01@san.rr.com> wrote:
>
>
>>In preperation for a Kidney transplant I had to have a Angiogram and Heart
>>Catherization. The angiogram revealed two of my arteries were blocked and
>>they
>>had to place stents in the blocked arteries. Everything
>>went well and I'm doing great. Thank God I wasn't in
>>the path of Katrina.
>>
>>respect
>>Nappy
>
>Jason,
You hit the the nail on the head. Its not a matter
of financial success. I know many middle class
blacks .
Let me tell you a story on how most blacks I know see
Powell and Rice.
Have you ever been in a warehouse? Most are big building
with a open floor plan and at one end is a set of stairs that
|
|
|
|
| Re: Question and a possible Idea for some of you [message #56308 is a reply to message #56262] |
Wed, 27 July 2005 06:34 |
Jef Knight
Messages: 19
Registered: July 2005
|
Junior Member |
|
|
lead to a office that over looks the floor. This is were the boss and the
head guys sit and look down on the workers.
They look over the figures and decide how much they need from each worker
to make their quarterly goals. To help them to get the workers to make their
goals they need
someone looking over them since they dont make much
money they tend to try do
just enough to reach the goals that are asked of them.
But,there is always one or two of the workers(black or brown)that does more
than the others and seems to
have more drive than the others. The big guys call him
up to the office and decide to make him a superviser.
Now everyone on the outside thinks,see blacks are
getting places. But not so fast! They make him believe
that if he continues to work hard he will become one
of them,but he will never become one of them and
at
some point he will realize that he has been use to do the
dirty work for them. When they want the plant to be more productive he is
the one that is down on the floor pushing
the workers to do more and more work to meet their ever increasing goals
,and when they can no longer meet
them then other changes must be made,like layoffs just
for the bottom line. While he is with the big boys he
helps them solve their big problems by thinking like
them as they do let them in on how they keep the
people on the floor in line. All the time telling them how
they are so different from the people on the floor and
the reason why are is because the others just dont have
it and never will until they start thinking like them. These
are the lies that tell them and hope they pass them along to the floor people.
POwell and Rice are these such people
and Bush and Cheny are in the big office looking down.
This is just a simple way of how black people see Powell
and Rice. They support the ideas of the men in the office
on the backs of the people on the floor. THe people on the
floor are the 90% of people that share 10% of the money and the office people
are the 10% of the people that share
90% of the money. Now ask your self which one are you
when they pass the estate tax or the big tax cut that gave me $600 and others
$22,000.
"Jason Miles" <Jmiles45@aol.com> wrote:
>
>"Neil" <OIUOIU@OIU.com> wrote:
>>
>>"jason Miles" <JMiles45@aol.com> wrote:
>>>
>>>
>>>Powell and Rice are not like any Black
>>>>people I know
>>>
>>>Hello!!!
>>>JM
>>
>>Jason, are you saying that ALL the black people you know are
>>downtrodden (I mean, apart from the black musicians you know
>>that have achieved financial success)? I must say that most of
>>the black/African-American people I know are not in that realm
>>at all, but are more decidedly middle-class, and a couple are
>>even what you'd consider very successful. I think poverty
>>extends across all races, and it just depends on where you live
>>that determines what percentage of ANY portion of the population
>>happens to be poor.
>>
>See Immediately you think we're just talking about Poor Black people-It's
>not that at all. It's a certain attitude and fiber that they have -a certain
>spirit that is missing from these people that are part of Bush's administration.
>If you sat down
>with some of the folks I know they would explain to you exactly
>what their story is. I'm not one to sit here and think that as
>a white person I am qualified to talk about this but I have
>been in the middle of many of their conversations views and attitudes and
>I will tell you that they ar not thrilled
>with George Bush and the republican party
>JM
>You guys are great! Both left and right!
I respect you all
thanks for listening
NappyWow Don,
I'm very lucky indeed,must have been scary.
Did you have nightmares after the stents?
respect
Nappy
DMorrell <don@toneworks.com> wrote:
>Woo hoo - cool that they caught that! Last year, I had an "episode":
>got taken to the ER, fl
|
|
|
|
| Re: Question and a possible Idea for some of you [message #56309 is a reply to message #56308] |
Wed, 27 July 2005 07:01 |
cujo
Messages: 285
Registered: July 2005
|
Senior Member |
|
|
at-lined, got brought back, admitted, had
>another stroke and heart attack a few hours later, got stented - my
>heart and blood flow's now doing fine.
>
>I pray that everything goes well with your future transplant.
>
>Peace - Don
>
>On 6 Sep 2005 06:39:02 +1000, "Nappy" <mgrant01@san.rr.com> wrote:
>
>>
>>In preperation for a Kidney transplant I had to have a Angiogram and Heart
>>Catherization. The angiogram revealed two of my arteries were blocked and
>>they
>>had to place stents in the blocked arteries. Everything
>>went well and I'm doing great. Thank God I wasn't in
>>the path of Katrina.
>>
>>respect
>>Nappy"cujo" <chris@applemanstudio.com> wrote:
>
>I have been thinking of a new bumper sticker:
>
>"the French were right"
>
>But, I'll lay off right now
>
>
How about these stickers:
"The French were right, in the middle of the oil for food scandal"
"Americans gave their life's in the 1991 Gulf War only to be undermined by
France, Germany, Russia, and China"
"American life's for french Iraqi oil, buy Total gas"
"American blood for French profits"
"Make the world a safer place, stop buying French , German, Russian, and
Chinese products!"
"The French sold Saddam surface to air missiles marked June 2003 that killed
my fellow Americans"
"Chirac is an Asshole!"
"Chirac is a lying cock sucker"
"Fuck France"
"Fuck Total Petroleum"
"The French are The Assholes of Europe!"
By the way, I'm part French and I am no longer proud of it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The French have betrayed all of us!
>
>"Martin Harrington" <lendan@bigpond.net.au> wrote:
>>What's wrong with FRENCH??
>>
>>--
>>Martin Harrington
>>www.lendanear-sound.com
>>
>>"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>>news:431c6cd5@linux...
>>> Don't get me started on the French...........
>>>
>>> ;o)
>>>
>>> "tonehouse" <zmcleod@comcast.net> wrote in message news:431c5555@linux...
>>>> You mean Paris "Texas"? I thought this was a rodeo group. Freedom Fries
>>> for
>>>> everyone...
>>>> "Rod Lincoln" <rlincoln@nospam.kc.rr.com> wrote in message
>>>> news:431c4ded@linux...
>>>> >
>>>> > She was in Greece cavorting around with Tara Reid on "Taradise" last
>>>> night.
>>>> > 8oP
>>>> > rod
>>>> > "Mike" <spamthis@alltel.net> wrote:
>>>> > >I would like to discuss Paris - anybody?.... anybody?
>>>> > >
>>>> > >
>>>> >
>>>>
>>>>
>>>
>>>
>>
>>
>Since adding another mec(this current project is more than
16 tracks), i have started tracking to the second card but
have discovered that to hear playback from the second card
the editor has to be in constrained mode.Will changing the
editor on the second card back from freeform to constrained
cause me to lose all edits on the 1st card/submix.(I have
an idea it won't but thought i'd check here first)Nappy,
What you are describing happens. I've seen it too. It also happens to
whites. The boss man will use whoever shows initiative in order to get the
job done. It reminds me a bit of the military structure. T
|
|
|
|
| Re: Question and a possible Idea for some of you [message #56314 is a reply to message #56308] |
Wed, 27 July 2005 08:43 |
Nappy
Messages: 198
Registered: September 2006
|
Senior Member |
|
|
hese people that are part of Bush's
administration.
> >If you sat down
> >with some of the folks I know they would explain to you exactly
> >what their story is. I'm not one to sit here and think that as
> >a white person I am qualified to talk about this but I have
> >been in the middle of many of their conversations views and attitudes and
> >I will tell you that they ar not thrilled
> >with George Bush and the republican party
> >JM
> >
>http://www.foxnews.com/story/0,2933,168600,00.htmlI had the exact opposite of nightmares - an even deeper and more
trusting faith in God. (Very timely... two months later, I was
diagnosed with an incurable cancer). The only downside to the stents
is that pastrami is now off my diet. And pizza. But here in Alaska,
neither are worth eating anyway. Ain't no Carnegie or Totonno's in
this neighborhood.
Nappy, I would assume that, if you are having nightmares, they are
related to stress. Certainly you are in one of the scariest emotional
places any of us could find ourselves.
Be very encouraged: I have several friends that have gone through
kidney transplants - one just a year ago, the others over the last
decade. They are all thriving and lead virtually the same lives they
have led all along.
Peace - Don
On 7 Sep 2005 02:57:29 +1000, "Nappy" <mgrant01@san.rr.com> wrote:
>Wow Don,
>I'm very lucky indeed,must have been scary.
>Did you have nightmares after the stents?
>
>respect
>Nappy
>
>DMorrell <don@toneworks.com> wrote:
>>Woo hoo - cool that they caught that! Last year, I had an "episode":
>>got taken to the ER, flat-lined, got brought back, admitted, had
>>another stroke and heart attack a few hours later, got stented - my
>>heart and blood flow's now doing fine.
>>
>>I pray that everything goes well with your future transplant.
>>
>>Peace - Don
>>
>>On 6 Sep 2005 06:39:02 +1000, "Nappy" <mgrant01@san.rr.com> wrote:
>>
>>>
>>>In preperation for a Kidney transplant I had to have a Angiogram and Heart
>>>Catherization. The angiogram revealed two of my arteries were blocked and
>>>they
>>>had to place stents in the blocked arteries. Everything
>>>went well and I'm doing great. Thank God I wasn't in
>>>the path of Katrina.
>>>
>>>respect
>>>NappyYou are also evidently, part asshole. I wouldn't be proud of that either.
It's that blanket mentality and generalization of people ie: "The French"
that undermine the human race.
If you think that US foreign policy (or any country for that matter)
has been Ivory clean throughout history, you are either extremely
ignorant or just in denial.
I disagree with a lot of French and US foreign policy and may disagree with Bush,
but I wouldn't make a statement that "Americans are Assholes" because
that's just not true. I would bet that the average French person and American
have the same heart, politics aside. Once people realize that it may actually open
some constructive dialog.
I am sure there are French Paris users here, and you are adding nothing constructive
to this forum. Grow up.
TC
Ferd Bloggs wrote:
>
> "The French are The Assholes of Europe!"
>
> By the way, I'm part French and I am no longer proud of it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
>I have two mecs and one 442.
Here is my situation...
When I use the two mecs with external wordclock they work fine.
Mec1 at A and mec2 at D (4 cards)
When I put a 442 (without the housesync in paris cfg) then I don't get the
ins/outs of 442 to work.
When I put the housesync then I get 442 ins/outs to work but mec2 ins outs
don't work.
I clock mec1 from ADIPRO8, mec2 from mec1 and 442 from external wordclock
that slaves to adipro8.
I don't want to have 442 in A card because then I cannot have 24bit spdif
output for monitoring...
Any help - suggestion ?
regards,
DimitriosDude! That bums me out.
"Mark McCurdy" <gmmccurdy@hotmail.
|
|
|
|
| Re: Question and a possible Idea for some of you [message #56318 is a reply to message #56314] |
Wed, 27 July 2005 11:53 |
Jef Knight
Messages: 19
Registered: July 2005
|
Junior Member |
|
|
Good luck
Deej
"Dimitrios" <musurgio@otenet.gr> wrote in message news:431de9b2@linux...
> I have two mecs and one 442.
> Here is my situation...
> When I use the two mecs with external wordclock they work fine.
> Mec1 at A and mec2 at D (4 cards)
> When I put a 442 (without the housesync in paris cfg) then I don't get
the
> ins/outs of 442 to work.
> When I put the housesync then I get 442 ins/outs to work but mec2 ins outs
> don't work.
> I clock mec1 from ADIPRO8, mec2 from mec1 and 442 from external wordclock
> that slaves to adipro8.
> I don't want to have 442 in A card because then I cannot have 24bit spdif
> output for monitoring...
> Any help - suggestion ?
> regards,
> Dimitrios
>
>So DJ,
Three mecs work fine instead of two mecs and a 442 right ?
Same goes for 4 mecs ?
No problems there either ?
regards,
Dimitrios
ps: Now I am "back" on Me...
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:431dec5d@linux...
> I had problems using a 442 and two MECs also. The solution was to attach
the
> 442 to card A. The 442 is initialized from the EDS card which is paged
when
> the computer boots. The MECs have on/off switches and are not recognized
by
> the computer/EDS cards until the Paris application is actually launched.
>
> The boot sequence that worked for me was as follows:
>
> 442 on card A, MECs on Cards B & C
>
> Turn on WC module
> Boot computer (you will see the 442 lights blink)
> Launch Paris
>
> I was having some trouble getting the MEC on Card B to work but this was
> solved by toggling the sync source from WC to internal and then back to WC
> in my default project.
>
> It didn't really work reliably, ever so I just bought another MEC and this
> did work reliabl\y.
>
> Good luck
>
> Deej
>
>
> "Dimitrios" <musurgio@otenet.gr> wrote in message news:431de9b2@linux...
> > I have two mecs and one 442.
> > Here is my situation...
> > When I use the two mecs with external wordclock they work fine.
> > Mec1 at A and mec2 at D (4 cards)
> > When I put a 442 (without the housesync in paris cfg) then I don't get
> the
> > ins/outs of 442 to work.
> > When I put the housesync then I get 442 ins/outs to work but mec2 ins
outs
> > don't work.
> > I clock mec1 from ADIPRO8, mec2 from mec1 and 442 from external
wordclock
> > that slaves to adipro8.
> > I don't want to have 442 in A card because then I cannot have 24bit
spdif
> > output for monitoring...
> > Any help - suggestion ?
> > regards,
> > Dimitrios
> >
> >
>
>The end of an era. He was absolutely brilliant as Maynard G. Krebbs on the
Dobie Gillis show. I will remember his role a Maynard much more than
Gilligan.
Sad...........
:(
"Mark McCurdy" <gmmccurdy@hotmail.com> wrote in message
news:431de6f9@linux...
> http://www.foxnews.com/story/0,2933,168600,00.html
>
>3 MECs works reliably. I still have to toggle the sync settings from WC to
internal to WC to get MEC #2 on card B to initialize on my system, but this
works reliably too. I have never used more than 3 x MECs so I don't know
about using 4, but if you are feeding them all directly from a WC rather
than daisy chaining them, you should theoretically be OK.
DEej
"Dimitrios" <musurgio@otenet.gr> wrote in message news:431ded16@linux...
> So DJ,
> Three mecs work fine instead of two mecs and a 442 right ?
> Same goes for 4 mecs ?
> No problems there either ?
> regards,
> Dimitrios
>
> ps: Now I am "back" on Me...
>
> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> news:431dec5d@linux...
> > I had problems using a 442 and two MECs also. The solution was to attach
> the
> > 442 to card A. The 442 is initialized from the EDS card which is paged
> when
> > the computer boots. The MECs have on/off switches and are not recognized
> by
> > the computer/EDS cards until the Paris application is actually launched.
> >
> > The boot sequence that worked for me was as follows:
> >
> > 442 on card A, MECs on Cards B & C
> >
> > Turn on WC module
> > Boot computer (you will see the 442 lights blink)
> > Launch Paris
> >
> > I was having some trouble getting the MEC on Card B to work but this was
> > solved by toggling the sync source from WC to internal and then back to
WC
> > in my default project.
> >
> > It didn't really work reliably, ever so I just bought another MEC and
this
> > did work reliabl\y.
> >
> > Good luck
> >
> > Deej
> >
> >
> > "Dimitrios" <musurgio@otenet.gr> wrote in message news:431de9b2@linux...
> > > I have two mecs and one 442.
> > > Here is my situation...
> > > When I use the two mecs with external wordclock they work fine.
> > > Mec1 at A and mec2 at D (4 cards)
> > > When I put a 442 (without the housesync in paris cfg) then I don't
get
> > the
> > > ins/outs of 442 to work.
> > > When I put the housesync then I get 442 ins/outs to work but mec2 ins
> outs
> > > don't work.
> > > I clock mec1 from ADIPRO8, mec2 from mec1 and 442 from external
> wordclock
> > > that slaves to adipro8.
> > > I don't want to have 442 in A card because then I cannot have 24bit
> spdif
> > > output for monitoring...
> > > Any help - suggestion ?
> > > regards,
> > > Dimitrios
> > >
> > >
> >
> >
>
>Thanks DJ
Is there by any chance the Spdif ou 24bit on a 442 ?
Regards,
Dimitrios
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:431dede0$1@linux...
> 3 MECs works reliably. I still have to toggle the sync settings from WC to
> internal to WC to get MEC #2 on card B to initialize on my system, but
this
> works reliably too. I have never used more than 3 x MECs so I don't know
> about using 4, but if you are feeding them all directly from a WC rather
> than daisy chaining them, you should theoretically be OK.
>
> DEej
>
>
> "Dimitrios" <musurgio@otenet.gr> wrote in message news:431ded16@linux...
> > So DJ,
> > Three mecs work fine instead of two mecs and a 442 right ?
> > Same goes for 4 mecs ?
> > No problems there either ?
> > regards,
> > Dimitrios
> >
> > ps: Now I am "back" on Me...
> >
> > "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> > news:431dec5d@linux...
> > > I had problems using a 442 and two MECs also. The solution was to
attach
> > the
> > > 442 to card A. The 442 is initialized from the EDS card which is paged
> > when
> > > the computer boots. The MECs have on/off switches and are not
recognized
> > by
> > > the computer/EDS cards until the Paris application is actually
launched.
> > >
> > > The boot sequence that worked for me was as follows:
> > >
> > > 442 on card A, MECs on Cards B & C
> > >
> > > Turn on WC module
> > > Boot computer (you will see the 442 lights blink)
> > > Launch Paris
> > >
> > > I was having some trouble getting the MEC on Card B to work but this
was
> > > solved by toggling the sync source from WC to internal and then back
to
> WC
> > > in my default project.
> > >
> > > It didn't really work reliably, ever so I just bought another MEC and
> this
> > > did work reliabl\y.
> > >
> > > Good luck
> > >
> > > Deej
> > >
> > >
> > > "Dimitrios" <musurgio@otenet.gr> wrote in message
news:431de9b2@linux...
> > > > I have two mecs and one 442.
> > > > Here is my situation...
> > > > When I use the two mecs with external wordclock they work fine.
> > > > Mec1 at A and mec2 at D (4 cards)
> > > > When I put a 442 (without the housesync in paris cfg) then I don't
> get
> > > the
> > > > ins/outs of 442 to work.
> > > > When I put the housesync then I get 442 ins/outs to work but mec2
ins
> > outs
> > > > don't work.
> > > > I clock mec1 from ADIPRO8, mec2 from mec1 and 442 from external
> > wordclock
> > > > that slaves to adipro8.
> > > > I don't want to have 442 in A card because then I cannot have 24bit
> > spdif
> > > > output for monitoring...
> > > > Any help - suggestion ?
> > > > regards,
> > > > Dimitrios
> > > >
> > > >
> > >
> > >
> >
> >
>
>DJ,
Is there any difference between XP and ME in this equation?
Cheers,
TC
DJ wrote:
> 3 MECs works reliably. I still have to toggle the sync settings from WC to
> internal to WC to get MEC #2 on card B to initialize on my system, but this
> works reliably too. I have never used more than 3 x MECs so I don't know
> about using 4, but if you are feeding them all directly from a WC rather
> than daisy chaining them, you should theoretically be OK.
>
> DEej
>
>
> "Dimitrios" <musurgio@otenet.gr> wrote in message news:431ded16@linux...
>
>>So DJ,
>>Three mecs work fine instead of two mecs and a 442 right ?
>>Same goes for 4 mecs ?
>>No problems there either ?
>>regards,
>>Dimitrios
>>
>>ps: Now I am "back" on Me...
>>
>>"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
>>news:431dec5d@linux...
>>
>>>I had problems using a 442 and two MECs also. The solution was to attach
>>
>>the
>>
>>>442 to card A. The 442 is initialized from the EDS card which is paged
>>
>>when
>>
>>>the computer boots. The MECs have on/off switches and are not recognized
>>
>>by
>>
>>>the computer/EDS cards until the Paris application is actually launched.
>>>
>>>The boot sequence that worked for me was
|
|
|
|
| Re: Question and a possible Idea for some of you [message #56319 is a reply to message #56309] |
Wed, 27 July 2005 11:56 |
Jef Knight
Messages: 19
Registered: July 2005
|
Junior Member |
|
|
as follows:
>>>
>>>442 on card A, MECs on Cards B & C
>>>
>>>Turn on WC module
>>>Boot computer (you will see the 442 lights blink)
>>>Launch Paris
>>>
>>>I was having some trouble getting the MEC on Card B to work but this was
>>>solved by toggling the sync source from WC to internal and then back to
>
> WC
>
>>>in my default project.
>>>
>>>It didn't really work reliably, ever so I just bought another MEC and
>
> this
>
>>>did work reliabl\y.
>>>
>>>Good luck
>>>
>>>Deej
>>>
>>>
>>>"Dimitrios" <musurgio@otenet.gr> wrote in message news:431de9b2@linux...
>>>
>>>>I have two mecs and one 442.
>>>>Here is my situation...
>>>>When I use the two mecs with external wordclock they work fine.
>>>>Mec1 at A and mec2 at D (4 cards)
>>>>When I put a 442 (without the housesync in paris cfg) then I don't
>
> get
>
>>>the
>>>
>>>>ins/outs of 442 to work.
>>>>When I put the housesync then I get 442 ins/outs to work but mec2 ins
>>
>>outs
>>
>>>>don't work.
>>>>I clock mec1 from ADIPRO8, mec2 from mec1 and 442 from external
>>
>>wordclock
>>
>>>>that slaves to adipro8.
>>>>I don't want to have 442 in A card because then I cannot have 24bit
>>
>>spdif
>>
>>>>output for monitoring...
>>>>Any help - suggestion ?
>>>>regards,
>>>>Dimitrios
>>>>
>>>>
>>>
>>>
>>
>
>No. S/PDIFon 442 is 20 bits. You can switch the 442 to submix #2 or 3 though
and use one of your MECs as the master on submix #1.
"Dimitrios" <musurgio@otenet.gr> wrote in message news:431dee6c@linux...
> Thanks DJ
> Is there by any chance the Spdif ou 24bit on a 442 ?
> Regards,
> Dimitrios
>
> "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> news:431dede0$1@linux...
> > 3 MECs works reliably. I still have to toggle the sync settings from WC
to
> > internal to WC to get MEC #2 on card B to initialize on my system, but
> this
> > works reliably too. I have never used more than 3 x MECs so I don't know
> > about using 4, but if you are feeding them all directly from a WC rather
> > than daisy chaining them, you should theoretically be OK.
> >
> > DEej
> >
> >
> > "Dimitrios" <musurgio@otenet.gr> wrote in message news:431ded16@linux...
> > > So DJ,
> > > Three mecs work fine instead of two mecs and a 442 right ?
> > > Same goes for 4 mecs ?
> > > No problems there either ?
> > > regards,
> > > Dimitrios
> > >
> > > ps: Now I am "back" on Me...
> > >
> > > "DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> > > news:431dec5d@linux...
> > > > I had problems using a 442 and two MECs also. The solution was to
> attach
> > > the
> > > > 442 to card A. The 442 is initialized from the EDS card which is
paged
> > > when
> > > > the computer boots. The MECs have on/off switches and are not
> recognized
> > > by
> > > > the computer/EDS cards until the Paris application is actually
> launched.
> > > >
> > > > The boot sequence that worked for me was as follows:
> > > >
> > > > 442 on card A, MECs on Cards B & C
> > > >
> > > > Turn on WC module
> > > > Boot computer (you will see the 442 lights blink)
> > > > Launch Paris
> > > >
> > > > I was having some trouble getting the MEC on Card B to work but this
> was
> > > > solved by toggling the sync source from WC to internal and then back
> to
> > WC
> > > > in my default project.
> > > >
> > > > It didn't really work reliably, ever so I just bought another MEC
and
> > this
> > > > did work reliabl\y.
> > > >
> > > > Good luck
> > > >
> > > > Deej
> > > >
> > > >
> > > > "Dimitrios" <musurgio@otenet.gr> wrote in message
> news:431de9b2@linux...
> > > > > I have two mecs and one 442.
> > > > > Here is my situation...
> > > > > When I use the two mecs with external wordclock they work fine.
> > > > > Mec1 at A and mec2 at D (4 cards)
> > > > > When I put a 442 (without the housesync in paris cfg) then I
don't
> > get
> > > > the
> > > > > ins/outs of 442 to work.
> > > > > When I put the housesync then I get 442 ins/outs to work but mec2
> ins
> > > outs
> > > > > don't work.
> > > > > I clock mec1 from ADIPRO8, mec2 from mec1 and 442 from external
> > > wordclock
> > > > > that slaves to adipro8.
> > > > > I don't want to have 442 in A card because then I cannot have
24bit
> > > spdif
> > > > > output for monitoring...
> > > > > Any help - suggestion ?
> > > > > regards,
> > > > > Dimitrios
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>When I was using XP, I was only using 2 x MECs so I don't know about 3 x
MECs when running XP.
Mic Cross could likely answer this question. I haven't seen him here in a
while. Gene Lennon might also have some info on this.
Deej
"TC" <tc@spammetodeathyoubastards.org> wrote in message
news:431deecd$1@linux...
> DJ,
>
> Is there any difference between XP and ME in this equation?
>
> Cheers,
>
> TC
>
> DJ wrote:
> > 3 MECs works reliably. I still have to toggle the sync settings from WC
to
> > internal to WC to get MEC #2 on card B to initialize on my system, but
this
> > works reliably too. I have never used more than 3 x MECs so I don't know
> > about using 4, but if you are feeding them all directly from a WC rather
> > than daisy chaining them, you should theoretically be OK.
> >
> > DEej
> >
> >
> > "Dimitrios" <musurgio@otenet.gr> wrote in message news:431ded16@linux...
> >
> >>So DJ,
> >>Three mecs work fine instead of two mecs and a 442 right ?
> >>Same goes for 4 mecs ?
> >>No problems there either ?
> >>regards,
> >>Dimitrios
> >>
> >>ps: Now I am "back" on Me...
> >>
> >>"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
> >>news:431dec5d@linux...
> >>
> >>>I had problems using a 442 and two MECs also. The solution was to
attach
> >>
> >>the
> >>
> >>>442 to card A. The 442 is initialized from the EDS card which is paged
> >>
> >>when
> >>
> >>>the computer boots. The MECs have on/off switches and are not
recognized
> >>
> >>by
> >>
> >>>the computer/EDS cards until the Paris application is actually
launched.
> >>>
> >>>The boot sequence that worked for me was as follows:
> >>>
> >>>442 on card A, MECs on Cards B & C
> >>>
> >>>Turn on WC module
> >>>Boot computer (you will see the 442 lights blink)
> >>>Launch Paris
> >>>
> >>>I was having some trouble getting the MEC on Card B to work but this
was
> >>>solved by toggling the sync source from WC to internal and then back to
> >
> > WC
> >
> >>>in my default project.
> >>>
> >>>It didn't really work reliably, ever so I just bought another MEC and
> >
> > this
> >
> >>>did work reliabl\y.
> >>>
> >>>Good luck
> >>>
> >>>Deej
> >>>
> >>>
> >>>"Dimitrios" <musurgio@otenet.gr> wrote in message
news:431de9b2@linux...
> >>>
> >>>>I have two mecs and one 442.
> >>>>Here is my situation...
> >>>>When I use the two mecs with external wordclock they work fine.
> >>>>Mec1 at A and mec2 at D (4 cards)
> >>>>When I put a 442 (without the housesync in paris cfg) then I don't
> >
> > get
> >
> >>>the
> >>>
> >>>>ins/outs of 442 to work.
> >>>>When I put the housesync then I get 442 ins/outs to work but mec2 ins
> >>
> >>outs
> >>
> >>>>don't work.
> >>>>I clock mec1 from ADIPRO8, mec2 from mec1 and 442 from external
> >>
> >>wordclock
> >>
> >>>>that slaves to adipro8.
> >>>>I don't want to have 442 in A card because then I cannot have 24bit
> >>
> >>spdif
> >>
> >>>>output for monitoring...
> >>>>Any help - suggestion ?
> >>>>regards,
> >>>>Dimitrios
> >>>>
> >>>>
> >>>
> >>>
> >>
> >
> >Great, thanks.
I'm in the process of building a big paris rig again, and am probably going to go
ME so I can use multiple adat cards per mec streaming audio in from my G5
running Abelton 5, and Logic 7. The plan is to do all programming in Live
or Logic, and record and mix the audio in Paris.
I may be bugging you a few times once I get this going..
Cheers,
TC
DJ wrote:
> When I was using XP, I was only using 2 x MECs so I don't know about 3 x
> MECs when running XP.
>
> Mic Cross could likely answer this question. I haven't seen him here in a
> while. Gene Lennon might also have some info on this.
>
> DeejSorry DJ,
How can you switch ?
I always see that mix a which is attached to 442 (A) has the monitor outputs
no matter where I switch the default submix to !
I am sure I miss something obvious here ,can you help some more ?
Regards,
Dimitrios
"DJ" <animix_spam-this-ahole_@animas.net> wrote in message
news:431df002@linux...
> No. S/PDIFon 442 is 20 bits. You can switch the 442 to submix #2 or 3
though
> and use one of your MECs as the master on submix #1.
>
>
> "Dimitrios" <musurgio@otenet.gr> wrote in message news:Report message to a moderator
|
|
|
|
Goto Forum:
Current Time: Fri May 08 17:18:59 PDT 2026
Total time taken to generate the page: 0.06563 seconds
|
The PARIS Forums
Search
Help
Members
Register
Login
Home
